Ƙayyadaddun bayanai
| Babban Bayanan Fasaha | Gun Rivet Nut Hannu Guda ɗaya | Bindigogin Rivet Nut Hannu Biyu | Bindigogin Rivet Nut Hannu Biyu |
| Saukewa: SSM360G | ND 80 | ND 100 | |
| L*W | 265*134mm | 350*125mm | 430*135mm |
| bugun jini | 9mm ku | 5mm ku | 7mm ku |
| Riko Range | M3 M4 M5 M6 | M4 M5 M6 M8 | M5 M6 M8 M10 |
| Aikace-aikace | Duk Makaho Rivet Nut | ||
Aikace-aikace
Gun rivet goro kayan aiki ne da aka yi amfani da shi musamman don ja da rive goro.Yana iya ja da rivet daban-daban M3 M4 M5 M6 M8 M10 M12 rivet kwayoyi.Yana da sauƙi kuma mai dacewa don aiki.
Ana amfani da bindigar Rivet don ɗaurewa da riƙon faranti daban-daban na ƙarfe, bututu da sauran masana'antun masana'antu.A halin yanzu, ana amfani da shi sosai wajen sarrafa kayan aikin lantarki da hasken masana'antu kamar motoci, sufurin jiragen sama, layin dogo, firiji, lif, masu sauyawa, kayan kida, kayan daki da kayan ado.An ɓullo da shi don magance matsalolin walda goro na karfe da kuma siriri bututu, kamar fusibility, da sauƙi zamiya na tapping zaren ciki.Ana iya rive shi ba tare da taɓa zaren ciki ba, kuma baya buƙatar walda goro.Yana da babban riveting yadda ya dace da amfani mai dacewa.
Manufar Rivet goro gun:
Idan goro na samfurin yana buƙatar shigar da shi a waje, amma sarari na ciki ya yi ƙanƙara don ba da izinin shugaban matsa lamba na sub riveter don shiga tsarin matsa lamba da tsiro da sauran hanyoyin ba zai iya cika buƙatun ƙarfin ba, to, matsa lamba da riveter. fadada riveting ba su yiwuwa.Dole ne a yi amfani da riveting don ɗaure faranti da bututu (0.5MM-6MM) na kauri daban-daban.Za a iya amfani da bindigar huhu ko ta hannu don yin riveting na lokaci ɗaya, wanda ya dace kuma mai ƙarfi;Yana maye gurbin goro na al'ada na walda kuma yana gyara lahani na takaddun ƙarfe na bakin ciki, fusibility na walda na bakin ciki, rashin daidaituwa na walda, da sauransu.
Gun riveting na goro kayan aiki ne na musamman na riveting don rive goro
1. Zabi kan bindiga daidai da ƙugiya gwargwadon girman goro, sassauta goro mai daidaitawa, cire hannun rigar bindigar, saka goro a cikin rami mai naushi tare da kayan aikin rivet goro, sannan a gyara goro.
2. Danna goro, kuma danna hannaye a ɓangarorin biyu na kayan aikin rivet goro zuwa tsakiyar zagaye mashaya tare da ɗan ƙaramin ƙarfi.Don haka, matsi ya kamata ya zama daidai.Yi hankali kada a sake matse hannaye a bangarorin biyu don lalata zaren ɗaure a cikin goro.Ciro kwallon bakelite kuma, kuma kullin rivet zai fita daga ramin zaren.
3. Sake kan kwallon.Kayan aikin zai rabu da goro bayan an kwance shi sosai.Yi hankali kada a cire kayan aikin goro kai tsaye don guje wa lalata zaren da ke cikin goro.
