Kayan abu
| Jiki | Aluminum | Karfe | Bakin Karfe ● |
| Gama | goge | Zine Plated | Halitta |
| Mandrel | Aluminum | Karfe | Bakin Karfe ● |
| Gama | goge | Zine Plated | Halitta |
| Nau'in kai | Domin, CSK | ||
Ƙayyadaddun bayanai
| Girman | Drill | Bangaren No. | M | Riko Range | B | K | E | X | Shear | Tashin hankali | JIRA FITA |
| max | max | max | max | max | KN | KN | N | ||||
| 4.8 (3/16) |  | Saukewa: BB71-4810 | 18.2 | 1.63-6.86 | 10.1 | 2.1 | 2.9 | 2.9 | 6 | 4.5 | ≥ 445 |
| Saukewa: BB71-4814 | 24.4 | 1.63-11.10 | 10.1 | 2.1 | 2.9 | 2.9 | 6 | 4.5 | ≥ 445 | ||
| 6.4 ( 1/4 ") |  | Saukewa: BB71-6414 | 23.7 | 2.03-9.53 | 13.3 | 2.9 | 3.9 | 3.7 | 10.5 | 8.2 | ≥ 1112 |
| Saukewa: BB71-6419 | 32.9 | 2.03-15.87 | 13.3 | 2.9 | 3.9 | 3.7 | 10.5 | 8.2 | ≥ 1112 | ||
Aikace-aikace
Monobolt wani nau'i ne na tsari na musamman, babban ƙarfin ƙarfe na haɗin gwiwa, sabon nau'in fastener.monobolt rivet mandrel da aka ja a cikin rivet jiki bayan rivet gun sadaukar tip - kaciya (convex) tip a karkashin mataki na mandrel breakage a so a cikin rivet jiki flange tsagi kafa "mechanical kulle" kulle ƙusa zuciya.
Aikace-aikace: motoci, marine, lantarki, elevators, kwantena, inji, gini, lantarki, jirgin sama masana'antu da sauran filayen.
Bambancin Monobolt Rivet & Interock Rivet
1.Mataki daya
Monobolt Rivet & Interock Rivet duka biyun babban ƙarfin tsarin makafi ne.Mono bolt rivet & interock rivet kuma ana kiranta da kofin-type makafin rivet, wanda ke cikin tsarin makafin rivet.Bayan riveting, za a zubar da abin da ya karye a cikin rivet, yana kulle mandrel sosai.
2.Amfani
A Monobolt rivets da Interock rivets aka yafi amfani ga riveting lokatai da high ƙarfi loads.Kuma yana iya tsayayya da lalata, don haka ana amfani da sau da yawa a riveting lokatai da karfi da lalata, kamar hoods da tukunyar jirgi tankuna.
3.Bambance-bambance
Rivet ɗin monobolt (makullin waje) bai bambanta da rivet ɗin interock (ƙulli na ciki) daga saman ba, kuma kaddarorin zahiri iri ɗaya ne.Makullin shine tsarin kulle bayan riveting ya bambanta.Gabaɗaya, rivet ɗin kulle na ciki (interock rivet) na iya amfani da gunkin rivet na gama-gari.Dole ne a yi amfani da rivet ɗin makullin waje (mono bolt rivet) tare da gunkin rivet na musamman.
4.Amfani da bambanci
A. Tsarin monobolt makafin rivet (makullin waje) yana da mataki wanda dan kadan ya fi rami na ciki a cikin rami na ciki na flange kai.Bayan an fadada rivets gabaɗaya, ɓangaren sama na mandrel ya karye.A ƙarƙashin matsa lamba na rivet gun, an cika shi a cikin wannan mataki, yana taka rawar kullewa.
B. Diamita na bangon ciki na tsarin interock makafin rivet (ƙulle na ciki) ya ɗan ƙanƙanta da diamita na ciki na bututun rivet.Bayan an fadada rivets ɗin gabaɗaya, ɗan diamita na rhombus na lu'u-lu'u na ciki za a matse shi cikin ƙananan ɓangaren madaidaicin karaya don kunna tasirin kullewa.
